Three screw pump

The traditional high-pressure balance technique is abandoned and the axial force balance of driven screws at low-pressure is adopted with even stress distribution, deformation of screw not easy, reliable and stable operation, no impulse and noise. 

The mechanical sealing method is adopted for pump, with the sealing cavity interlinked to the suction, at the same time, the structure is designed to provide sufficient cooling cycle to the sealing to ensure the sealing effect and no leakage.

The traditional inlet and outlet positions are changed to that the inlet and outlet are located at both sides of the pump but a straight line, resulting into a pleasing appearance; meanwhile, the design is innovated. Therefore, the inlet and outlet could be exchanged on user’s site without any change to pipelines.

The pump is in a simple and compact structure, and the pump core assembly is in assembly constructure, therefore, the pump core can be taken out as a whole, which is convenient for maintenance.

The valve equipped on the product can provide transient protection to the pump to prevent overload, however, it can not be used as overflow valve for the pipe.

6.Various combination inlet and outlet, convenient for piping on site. The relative positions between inlet and outlet are viewed from drive end to pump.