High-quality vertical slurry pumps

Our vertical pump is designed for applications requiring great reliability and durability. It is designed for handling abrasive slurries and corrosive fluids by using either elastomer or alloy lined wet ends components. The pump is suitable for mining, chemical treatment, waste water treatment, gravel and general process application.Please contact me and I will help you select the appropriate model.

Discharge Size 40 to 250 mm
Capacity 17 to 1000m3/h
Heads 4 to 40 m
Install Type Vertical

product details

Vertical slurry pump Typical Application:

1.Mill Discharge

2. Coarse Sand

3. Tailings

4. Mineral Concentration

5. Heavy Media

6. Coal Washing

7. Process Chemical

8.Wastewater treatment

Vertical slurry pump Features:

1.The vertical metal pumps are typically immersed in water at the bottom of the tank for conveying highly abrasive, coarse particles of highly viscous slurry.

2.One of the main features of this vertical metal pump is the integral pump casing. The wet end is replaceable and made of high chrome for maximum corrosion resistance. Vertical metal pumps are available for different pumping applications.

3.Various types of impellers are designed to handle different pumping tasks.

4. The vertical cantilever design eliminates the need for shaft seals or seal water.

5. The parts immersed in the mud can be made of metal or rubber.

Vertical slurry pump Advantages

1.The physical layout of the submersible Vertical Pump simplifies maintenance operations.

2. The Vertical Pump body is bolted to the support plate. A bearing assembly is mounted on the top of the support plate. Close to the pump end is a double row tapered roller bearing. Connected to the drive end is a single row cylindrical roller bearing.

3. Mounted on the bearing assembly is a motor support or motor mount where the motor is mounted. A flexible coupling or drive belt connects the motor shaft to the pump shaft.

4. In the absence of shat seals or sealed water, the Vertical Pump can operate normally even if there is not enough mud to reach the suction side.

5. A screen filter is provided on the suction side to separate large particles from the slurry.

Installation Types

DC: The motor mounting base is set above the bearing assembly, so it is easy to replace or repair the motor parts.

BD: A V-belt is used to connect the motor shaft and the vertical heavy duty pumps shaft. The motor support frame is installed above the bearing assembly, allowing easy replacement of grooved wheels. The purpose of swapping grooved wheels is to change the rotary speed of the pump shaft in order to suit varying pumping applications or conform to the worn-down sump pump.